This glass lifting sling is constructed with a four-layer composite structure. The outer three layers are made of high-strength polyurethane for load-bearing, while the inner layer is a high-tech anti-cutting layer.This ensures a long service life.
An R-shaped angle steel is embedded between the load-bearing layer and the cut-resistant layer, which can be used for a lifetime and ensures the glass lifting sling strong load-bearing capacity.
It has strong environmental adaptability, is resistant to ultraviolet rays, chemicals and moisture, and can operate within the temperature range of -40℃ to 120℃.
The load capacity can reach up to 15 tons.
With a special design, the weight is evenly distributed across all positions of the glass hanger and stress points are eliminated, resulting in a low risk of glass breakage.
Light in weight and with good flexibility, easy to operate; and the glass lifting sling can be easily adjusted to fit different sizes and shapes of glass.
Swiss material hangers have excellent tensile strength and are not prone to breaking.
The glass lifting sling is a specific solution designed for lifting and transporting flat glass and other fragile materials.
The sling has the characteristics of high strength, light weight, softness and strong environmental adaptability. It is capable of supporting the hoisting of large and heavy glass, is operationally flexible, can be used in narrow spaces and outdoors, and ensures that the glass is not scratched during the hoisting process.
2.Structure
Composition of materials
Multiple layers(Sling)
Anti-cutting layer
Steel Base
Polyester
Rubber
Steel
Notes:
The length of the glass sling should be glass tall plus 700mm
The length of the glass hanging bar should be the glass length minus 500mm
Four-Layer Polyester layers(Sling)
This glass lifting sling is made of a four-layer composite structure. The outer three layers are polyurethane layers, and the innermost layer is a high-tech anti-cutting layer, which ensures a longer service life.
900mm Anti-Cutting Inner Layer
The advanced high-tech anti-cut layer can effectively prevent the sharp edges of the glass from being damaged during handling.
R-Angle Full-Steel Base Plate
The R-shaped steel plate between the bearing layer and the anti-cut layer enhances the load-bearing capacity of the glass sling and prevents deformation.
1. What material is the glass lifting sling made of?
The glass sling is made of high-strength polyester and a high-tech anti-cut layer. It has good tensile strength, is not prone to deformation, and has strong load-bearing capacity.
2. How much weight of glass can the glass slings bear?
The maximum load-bearing capacity depends on the size, material and design of the cable. It can reach up to 5 tons.
3. Is the glass lifting sling adjustable in length?
Yes, the sling can be adjusted in length to fit the size and weight of various types of glass.
4. Can the glass lifting slings cable be used with tempered glass or laminated glass?
Yes, they are suitable for various types of glass such as tempered glass, laminated glass and float glass.
Specializes in providing comprehensive, one-stop solutions for the design, production, and export of equipment in the glass deep processing and door/window industries
