All Products

PLC+ frequency conversion control system, with a high degree of automation
The coating monitoring device in the feeding section and the soft brush system in the cleaning section ensure zero damage processing throughout the process
The high-power high-pressure fan in the drying section and the dual-motor dual-station design in the aluminum frame assembly section achieve high efficient hollow processing
The outer plate section is hydraulically driven to smoothly move the worktable, and the motor + variable frequency speed regulation drives the lifting. When applying adhesive, the depth of the adhesive strip is digitally displayed and precisely adjusted by the handwheel, achieving high-precision processing throughout the process
The inflation section adopts the bottom charging and top exhaust mode. The gas nozzles in the non-working area automatically close, resulting in a high gas utilization rate
Safety monitoring device, low-voltage automatic sound and light alarm

Features
Multiple grinding heads operate synchronously, and chamfering, film removal and polishing are completed in one go
The servo control system and human-machine interaction interface enable automatic positioning and edge grinding of glass, achieving fully automated processing
Dual safety protection, self-diagnostic alarm + emergency stop device, high safety factor
Synchronous belt transmission, with an error of less than 0.05mm, achieves high-precision edge grinding
It is equipped with a built-in water circulation system, featuring adaptive water spraying. When the equipment is not in operation, it automatically switches over, which is environmentally friendly and energy-saving
Industrial aluminum profil frame + stainless steel sink, corrosion-resistant, stable structure and long service life

The harp rack is available with 40,50, 84 or 100 slots and comes with plastic - covered rods. 
There are two types of bottoms. One is equipped with pulleys, which allow the glass to slide in and out of the rack easily and safely. 
The other is made of low - friction, high - density polyethylene material, which provides greater stability when the glass is placed on it and offers a non - stick surface for insulated glass. 
The surface is powder - coated, and custom colors are supported. It is equipped with 4 swivel casters, each with a load - bearing capacity of 1 ton. 
 
 

L-shaped racks are the most widely used solutions for storing and transporting glass in glass deep processing and door&window factories. 
We have enhanced these racks to better meet our customers' specific requirement

The cutting efficiency of the patented cutting head control technology is more than % higher than that of ordinary
cutting equipment High cutting accuracy and good breaking effect, which improves the service life of the grinding wheel and reduces the
production cost in the edging process.
It can be seamlessly connected with glass storage system and ERP system, and has completely independent intellectual
property rights.
The whole cutting process is inspected to protect the cutting equipment in real time.

The machine with conveyor belt , before CNC can loading machine ,after the CNC , The washing machine can connect for line production. Or other machine connect together for production line .
Import the CAD drawing ,operator need to Configuration tool, sending location parameter ,then The Glass transfer to the indication location ,the camera will scan the glass ,sucker fixed the glass ,then automatically process the glass .
The conveyor belt distance can change position by hand .
The model is up and down conveyor belt.

This machine is driven by bi-servo transfer system, all wheels are feeding automatically, and all polish wheels are automatic compensation. All settings and adjustment during processing can be done automatically instead of manual adjustment to shorten the adjusting time and keep the stability of processing quality. Better for industries of high furniture, fish tank, display cabinet, shower room, and show room that have high requests for polish effect.

Glass Washer Quality:
The glass washer is equipped with sand and carbon filters along with soft coat low-e brushes. This combination ensures that the glass is not only cleaned thoroughly but also remains scratch-free.
Air knives are used to ensure that the glass is completely dry after washing.
Inspection and Spacer Placement Conveyor Panel:
The conveyor panel has a special treatment, which provides convenience for glass inspection.
TPE Applicator:
It offers precision application at high speeds, maximizing output.
The application head allows for inverse corners and can handle variable shapes.
Pressing Quality:
Ensures excellent sealant adhesion and presses the glass to the overall unit thickness with tight tolerances.
There is an optional gas filling feature with an initial percentage of 90%.
Additional Option:
Automatic glass placement at infeed and outfeed further reduces labor costs.
Line Choices:
The line allows for choices between IG (insulated glass) with TEP warm edge spacer and traditional aluminum spacer.

The A-frame trolley is primarily used for handling and transporting glass or stone slabs within workshops, warehouses, and construction sites. Its load capacity can be customized based on specific needs. The trolley is equipped with two swivel wheels and two directional wheels, allowing for easy maneuverability in different directions. Additionally, we have designed an electric tow truck for this trolley to help customers easily drag the racks.