Glass Handling Systems

Powered by lithium batteries, it does not require power supply. The battery can last for 4 to 6 hours and is suitable for outdoor use.
Electric or manual 360° rotation, precise positioning of the glass
Equipped with three safety protection devices, including vacuum insufficient alarm device, digital pressure monitoring device and power-off protection device, to ensure that the glass will not fall off within 15 minutes.
Sealed protective components, dustproof and waterproof, can still work normally in extreme weather conditions.
Anti-slip suction cup device ensures that the glass will not suddenly fall off and has high safety.
Silicone material suction cup, strong adaptability and adhesion, can work normally within the temperature range of -30°C to 100°C, with an adhesion force of 800kg.

The fully automatic electric glass vacuum elevator is a dedicated equipment for loading, unloading and handling large and medium-sized glasses, and is often used in fields such as curtain wall installation and glass deep processing.
It is powered by lithium batteries and does not require a power source. Sealed protective components, dust-proof and water-proof, suitable for use in extreme outdoor weather conditions
Electric or manual 90° flip, 360° rotate, precisely position the glass
Three safety protection devices, namely vacuum insufficiency alarm device, digital pressure monitoring device and power-off protection device, ensure that the glass does not fall off for 15 minutes in case of emergency
The anti-slip suction cup device ensures that the glass will not suddenly fall off, with a high safety factor
The suction cup has a strong adsorption force and can bear a weight of 12 kilograms
The number of suction cups can be customized

The pneumatic glass vacuum lifter is a specialized equipment designed for loading, unloading and transporting large and medium-sized glass. It is commonly used in curtain wall installation, glass processing and other fields.
Electric or manual 90° flipping, 360° rotation, precise positioning of the glass
Equipped with three safety protection devices, including vacuum insufficient alarm device, digital pressure monitoring device and  protection locking device device, to ensure that the glass will not fall off within 15 minutes.
Sealed protective components, dustproof and waterproof, can still work normally in extreme weather conditions.
Anti-slip suction cup device ensures that the glass will not suddenly fall off and has high safety.
Silicone material suction cup, strong adaptability and adhesion, can work normally within the temperature range of -30°C to 100°C, with an adhesion force of 800kg.
Lightweight, labor-saving, suitable for use in scenarios involving high-altitude operations or frequent movement.
Driven by compressed air, it does not rely on power supply and is suitable for outdoor use.

The pneumatic glass vacuum lifter is a specialized equipment designed for loading, unloading and transporting large and medium-sized glass. It is commonly used in curtain wall installation, glass processing and other fields.
Manual 90° flipping, 360° rotation, precise positioning of the glass
Equipped with three safety protection devices, including vacuum insufficient alarm device, digital pressure monitoring device and protection device, to ensure that the glass will not fall off within 15 minutes.
Sealed protective components, dustproof and waterproof, can still work normally in extreme weather conditions.
Anti-slip suction cup device ensures that the glass will not suddenly fall off and has high safety.
Silicone material suction cup, strong adaptability and adhesion, can work normally within the temperature range of -30°C to 100°C, with an adhesion force of 800kg.
Lightweight, labor-saving, suitable for use in scenarios involving high-altitude operations or frequent movement.
Driven by compressed air, it does not rely on power supply and is suitable for outdoor use.

This glass lifting sling is constructed with a four-layer composite structure. The outer three layers are made of high-strength polyurethane for load-bearing, while the inner layer is a high-tech anti-cutting layer.This ensures a long service life.
An R-shaped angle steel is embedded between the load-bearing layer and the cut-resistant layer, which can be used for a lifetime and ensures the glass lifting sling strong load-bearing capacity.
It has strong environmental adaptability, is resistant to ultraviolet rays, chemicals and moisture, and can operate within the temperature range of -40℃ to 120℃.
The load capacity can reach up to 15 tons.
With a special design, the weight is evenly distributed across all positions of the glass hanger and stress points are eliminated, resulting in a low risk of glass breakage.
Light in weight and with good flexibility, easy to operate; and the glass lifting sling can be easily adjusted to fit different sizes and shapes of glass.
Swiss material hangers have excellent tensile strength and are not prone to breaking.

Anti-deformation seamless steel pipe, with high load-bearing capacity
Fully welded and polished treatment + polyurethane resin coating, making the surface of the glass lifting bar​ rust-proof and scratch-resistant
Unique design, ensuring the dynamic balance of the glass lifting beam structure and ensuring safe lifting
Eight lifting points, enabling the glass lifting bar​ to support the lifting of various sizes of glass
Customized services are provided

This super large electrical glass lifter is equipped with 24 industrial-grade vacuum suction cups (the number of suction cups can be selected). It is commonly used for high-altitude operations, such as curtain wall installation.
The dual safety system of vacuum alarm and power failure protection will lock the suction cups after a power failure and ensure that the glass will not fall off from the glass vacuum lifter within 15 minutes. The safety factor is very high.
Remote control, sensing range 50 meters
Battery-powered, long battery life, no need for wires, suitable for outdoor use
Sealed storage of parts, waterproof and dustproof, capable of working in extreme weather conditions

The LC glass hoisting clamp is designed in Italy and is a specialized equipment for hoisting medium and large-sized glass
It adopts a die-cast aluminum structure, which is resistant to deformation and has a long service life
In the area in contact with glass, natural rubber is embedded into the aluminum surface through a hot-melt process and will never fall off. It has a natural affinity for glass and can also prevent glass from slipping
The design of four polyurethane casters enables the glass to slide along the casters into the interior of the lifting clamp at the beginning of the lift without touching the aluminum surface, thus avoiding damage
Dual redundant vacuum system + anti-sway design + anti-slip rubber suction cups + mechanical locking device, multiple safety protection systems, high safety factor
Lightweight design saves manpower

Strong carrying capacity (2 tons - 5 tons) and lifting capacity (6 meters).
The high-strength steel profile structure gives the forklift jib strong resistance to deformation.
Compatible with various mainstream forklift models and equipped with quick insertion and release interfaces, no modification of the forklift is required.
Dual protective devices of protective chains and mechanical locking ensure the risk of chain detachment of the forklift jib boom is reduced, improving safety.