All Products

The glass double-sided edge grinding machine is a specialized equipment for glass edge grinding processing and an indispensable part of the glass deep processing field
It is equipped with two grinding wheels, namely diamond grinding wheels and resin grinding wheels, featuring high grinding accuracy and a service life of 1000 to 3000 meters
It is equipped with a buffer device, resulting in a low glass wear rate
The grinding wheel is movable and suitable for glass of various thicknesses and sizes
It can be connected to a cleaning machine for combined use
It adopts a telescopic nylon wheel platform to adapt to glass of different sizes
The configurable Low-E coating removal device can simultaneously remove the surface coating after edge grinding of the glass

This glass edging machine is equipped with a water circulation cooling system inside, which is both clean and energy-efficient, prolonging the service life of the equipment.
The lightweight body design occupies little space and is easy to move, making it suitable for configuration in small factories.
The dual diamond grinding heads design ensures high grinding efficiency of the glass edging machine, and the lifespan of the grinding heads can reach 3,000 meters.
The use of a telescopic universal wheel platform enables it to adapt to different sizes of glass.
A buffer device is equipped to ensure that the edge grinding accuracy error of the glass edging machine during operation is less than 0.01 millimeters.

The glass storage system can centrally manage the glass, making it very convenient to retrieve and store. It significantly saves storage space.
Lightweight and compact design: Space-saving
Safety protection devices: Rubber pad + anti-slip and scratch-resistant surface treatment + anti-tipping design
Surface anti-corrosion: Electrostatic spraying
Scalable: Modular assembly
Adjustable Angle: Inclined access (15°-30°)
Push-pull design: Effortless
Customized services: height, load-bearing capacity, number of units
It can be customized in size and design. In manual mode, 15 racks can be installed in one group. Our most popular model is a group of 10 racks.
 

This glass storage system adopts a vertical design, with a compact structure and efficient space utilization. It is suitable for small warehouses as well, provided that the height exceeds 4 meters.
The wheels at the bottom of each drawer are equipped with mechanical locking devices, which can fix the position and prevent sliding, avoiding accidents and ensuring safety and reliability.
The drawers can be pulled horizontally for quick access to the glass.
Each glass storage system can accommodate up to 40 drawers, with a maximum load capacity of 40 tons.
The surface is equipped with rubber with built-in steel plates, which has a natural affinity for glass.
The high-quality steel welding structure is not prone to deformation and has a long service life.
Electrostatic spraying is used to achieve a lasting surface effect.
The modular design makes installation, disassembly, and repair convenient.
The motor-driven system enables the glass storage equipment to move at a speed of up to 1m/min, which is fast, stable, and efficient.

The glass film deleting machine is a device specifically designed for removing coatings and films from the surface of glass.
It adopts a dual-track design and operates smoothly.
The pressure and thickness of the peeling wheels are adjusted by cylinders, with an accuracy of up to millimeter level.
A variable frequency speed control design is used, enabling the glass film deleting machine to adjust the speed according to different types of glass.
An air-floating platform is used, with low friction and minimal damage to the glass.
The double-layer peeling mode includes heating peeling and mechanical peeling, suitable for different process flows.
In the semi-automatic mode, the glass film deleting machine supports manual control and can be started and stopped at any time. In the fully automatic mode, the machine runs automatically through preset parameters.

This glass lifting sling is constructed with a four-layer composite structure. The outer three layers are made of high-strength polyurethane for load-bearing, while the inner layer is a high-tech anti-cutting layer.This ensures a long service life.
An R-shaped angle steel is embedded between the load-bearing layer and the cut-resistant layer, which can be used for a lifetime and ensures the glass lifting sling strong load-bearing capacity.
It has strong environmental adaptability, is resistant to ultraviolet rays, chemicals and moisture, and can operate within the temperature range of -40℃ to 120℃.
The load capacity can reach up to 15 tons.
With a special design, the weight is evenly distributed across all positions of the glass hanger and stress points are eliminated, resulting in a low risk of glass breakage.
Light in weight and with good flexibility, easy to operate; and the glass lifting sling can be easily adjusted to fit different sizes and shapes of glass.
Swiss material hangers have excellent tensile strength and are not prone to breaking.

Supports storage of various sizes, thicknesses and types of glass.
The base plate has been reinforced to ensure that the glass will not tip over even on a 15° slope.
The surface of the glass rack is covered with rubber plates to prevent the glass from being scratched.
The A-shaped glass rack surface undergoes electrostatic spraying treatment to prevent rusting.
Made of high-strength steel or aluminum, it ensures a sturdy structure and strong load-bearing capacity.
It has a custom expansion function and can accommodate dozens of types of glass product packaging.

Anti-deformation seamless steel pipe, with high load-bearing capacity
Fully welded and polished treatment + polyurethane resin coating, making the surface of the glass lifting bar​ rust-proof and scratch-resistant
Unique design, ensuring the dynamic balance of the glass lifting beam structure and ensuring safe lifting
Eight lifting points, enabling the glass lifting bar​ to support the lifting of various sizes of glass
Customized services are provided

PLC+ frequency conversion control system, with a high degree of automation
The coating monitoring device in the feeding section and the soft brush system in the cleaning section ensure zero damage processing throughout the process
The high-power high-pressure fan in the drying section and the dual-motor dual-station design in the aluminum frame assembly section achieve high efficient hollow processing
The outer plate section is hydraulically driven to smoothly move the worktable, and the motor + variable frequency speed regulation drives the lifting. When applying adhesive, the depth of the adhesive strip is digitally displayed and precisely adjusted by the handwheel, achieving high-precision processing throughout the process
The inflation section adopts the bottom charging and top exhaust mode. The gas nozzles in the non-working area automatically close, resulting in a high gas utilization rate
Safety monitoring device, low-voltage automatic sound and light alarm