All Products

This glass lifting sling is constructed with a four-layer composite structure. The outer three layers are made of high-strength polyurethane for load-bearing, while the inner layer is a high-tech anti-cutting layer.This ensures a long service life.
An R-shaped angle steel is embedded between the load-bearing layer and the cut-resistant layer, which can be used for a lifetime and ensures the glass lifting sling strong load-bearing capacity.
It has strong environmental adaptability, is resistant to ultraviolet rays, chemicals and moisture, and can operate within the temperature range of -40℃ to 120℃.
The load capacity can reach up to 15 tons.
With a special design, the weight is evenly distributed across all positions of the glass hanger and stress points are eliminated, resulting in a low risk of glass breakage.
Light in weight and with good flexibility, easy to operate; and the glass lifting sling can be easily adjusted to fit different sizes and shapes of glass.
Swiss material hangers have excellent tensile strength and are not prone to breaking.

Supports storage of various sizes, thicknesses and types of glass.
The base plate has been reinforced to ensure that the glass will not tip over even on a 15° slope.
The surface of the glass rack is covered with rubber plates to prevent the glass from being scratched.
The A-shaped glass rack surface undergoes electrostatic spraying treatment to prevent rusting.
Made of high-strength steel or aluminum, it ensures a sturdy structure and strong load-bearing capacity.
It has a custom expansion function and can accommodate dozens of types of glass product packaging.

Anti-deformation seamless steel pipe, with high load-bearing capacity
Fully welded and polished treatment + polyurethane resin coating, making the surface of the glass lifting bar​ rust-proof and scratch-resistant
Unique design, ensuring the dynamic balance of the glass lifting beam structure and ensuring safe lifting
Eight lifting points, enabling the glass lifting bar​ to support the lifting of various sizes of glass
Customized services are provided

PLC+ frequency conversion control system, with a high degree of automation
The coating monitoring device in the feeding section and the soft brush system in the cleaning section ensure zero damage processing throughout the process
The high-power high-pressure fan in the drying section and the dual-motor dual-station design in the aluminum frame assembly section achieve high efficient hollow processing
The outer plate section is hydraulically driven to smoothly move the worktable, and the motor + variable frequency speed regulation drives the lifting. When applying adhesive, the depth of the adhesive strip is digitally displayed and precisely adjusted by the handwheel, achieving high-precision processing throughout the process
The inflation section adopts the bottom charging and top exhaust mode. The gas nozzles in the non-working area automatically close, resulting in a high gas utilization rate
Safety monitoring device, low-voltage automatic sound and light alarm

This super large electrical glass lifter is equipped with 24 industrial-grade vacuum suction cups (the number of suction cups can be selected). It is commonly used for high-altitude operations, such as curtain wall installation.
The dual safety system of vacuum alarm and power failure protection will lock the suction cups after a power failure and ensure that the glass will not fall off from the glass vacuum lifter within 15 minutes. The safety factor is very high.
Remote control, sensing range 50 meters
Battery-powered, long battery life, no need for wires, suitable for outdoor use
Sealed storage of parts, waterproof and dustproof, capable of working in extreme weather conditions

With a 90° vertical structure and anti-slip design, the risk of the glass sliding off the l buck glass rack is reduced.
A scratch-resistant design is adopted. A layer of rubber sheet is covered on the surface of the flat glass l storage racks. This rubber sheet has a natural affinity with the glass and will not scratch the glass.
The bottom for forklift holes and the top lifting holes are compatible with forklifts and cranes, and can be used in conjunction with the l frame glass storage rack to transport the glass.
The main body is made of thickened square steel pipes, with a stable structure and a long service life.
The multi-layer stacking design allows for the vertical stacking of the l-frame glass racks for 3 to 5 layers, saving space.
The surface is coated with an epoxy resin layer to prevent corrosion.
The anti-toppling design, with a heavier bottom, ensures that the glass frame will not tip over even on a 15° slope.
Detachable for easy transportation.

Supports various sizes of glass storage
Anti-toppling design. The base plate is reinforced to ensure that the a frame glass rack​ will not tip over even on a 15° slope
The surface of the a frame glass rack​ is covered with rubber plates, which have a natural affinity for glass and will not scratch the glass
The frame of the glass shelf is made of heavy-duty steel pipes and is coated with a protective layer to prevent rust and corrosion, ensuring a long service life.
The tools are small and flexible, with limited environmental restrictions. They can be used in factories, workshops, and construction sites.
Customizable design:The size, load-bearing capacity and surface material of the glass rack​ can all be chosen.

The LC glass hoisting clamp is designed in Italy and is a specialized equipment for hoisting medium and large-sized glass
It adopts a die-cast aluminum structure, which is resistant to deformation and has a long service life
In the area in contact with glass, natural rubber is embedded into the aluminum surface through a hot-melt process and will never fall off. It has a natural affinity for glass and can also prevent glass from slipping
The design of four polyurethane casters enables the glass to slide along the casters into the interior of the lifting clamp at the beginning of the lift without touching the aluminum surface, thus avoiding damage
Dual redundant vacuum system + anti-sway design + anti-slip rubber suction cups + mechanical locking device, multiple safety protection systems, high safety factor
Lightweight design saves manpower

The a frame glass rack​ integrates the storage and transportation of glass, and is applicable to numerous fields such as building curtain walls and furniture manufacturing.
Made of square steel tubes and has a stable structure with strong load-bearing capacity.
Rubber strips and steel plates are embedded on the surface of the a frame glass storage rack, which have a natural affinity with the glass and can ensure that the glass will not be scratched during storage.
The surface is treated with electrostatic spraying to prevent rust and corrosion, and has a long service life.
Can be used in conjunction with forklifts and cranes.
The unique anti-toppling design has a weight increase treatment at the bottom, so the a frame glass transport rack will not topple even on a 15-degree slope.
Can be disassembled for easy transportation.
Length, height, base width and load capacity can all be customized.