Tel: +86-185-6282-7317   E-mail: info@wentrica.com
English
Home » Products

Product Category

Contact Us

All Products

  • Heavy Duty Steel A Frame Glass Rack with Rubber Pads for Safe Storage
    Supports various sizes of glass storage
    Anti-toppling design. The base plate is reinforced to ensure that the a frame glass rack​ will not tip over even on a 15° slope
    The surface of the a frame glass rack​ is covered with rubber plates, which have a natural affinity for glass and will not scratch the glass
    The frame of the glass shelf is made of heavy-duty steel pipes and is coated with a protective layer to prevent rust and corrosion, ensuring a long service life.
    The tools are small and flexible, with limited environmental restrictions. They can be used in factories, workshops, and construction sites.
    Customizable design:The size, load-bearing capacity and surface material of the glass rack​ can all be chosen.
  • Heavy Duty LC Glass Lifting Clamp for Safe And Scratch-Free Vertical Large Plate Glass Handling
    The LC glass hoisting clamp is designed in Italy and is a specialized equipment for hoisting medium and large-sized glass
    It adopts a die-cast aluminum structure, which is resistant to deformation and has a long service life
    In the area in contact with glass, natural rubber is embedded into the aluminum surface through a hot-melt process and will never fall off. It has a natural affinity for glass and can also prevent glass from slipping
    The design of four polyurethane casters enables the glass to slide along the casters into the interior of the lifting clamp at the beginning of the lift without touching the aluminum surface, thus avoiding damage
    Dual redundant vacuum system + anti-sway design + anti-slip rubber suction cups + mechanical locking device, multiple safety protection systems, high safety factor
    Lightweight design saves manpower
  • Detachable A-frame Glass Rack with Protective Rubber for Safe Transportation And Storage of Glass Panels
    The a frame glass rack​ integrates the storage and transportation of glass, and is applicable to numerous fields such as building curtain walls and furniture manufacturing.
    Made of square steel tubes and has a stable structure with strong load-bearing capacity.
    Rubber strips and steel plates are embedded on the surface of the a frame glass storage rack, which have a natural affinity with the glass and can ensure that the glass will not be scratched during storage.
    The surface is treated with electrostatic spraying to prevent rust and corrosion, and has a long service life.
    Can be used in conjunction with forklifts and cranes.
    The unique anti-toppling design has a weight increase treatment at the bottom, so the a frame glass transport rack will not topple even on a 15-degree slope.
    Can be disassembled for easy transportation.
    Length, height, base width and load capacity can all be customized.
  • High-Efficiency Glass Laminating Furnace with Vacuum And Heating System for EVA, PVB, And SGP Interlayer Film Processing
    This glass tempering furnace is equipped with a PLC control system, which is fully automated. It features real-time monitoring, abnormal alarm function, and one-key control capabilities. 
    Multi-layer and multi-station design, capable of processing multiple pieces of glass simultaneously, with high production efficiency.
    The air circulation heating mode of "thermostat fan + convection chamber" is adopted to ensure the uniform temperature in each workstation of the glass laminating furnace. 
    The unique gas bonding technology can completely eliminate the bubbles between the PVB/EVA film and the glass.
    Energy consumption is less than 25KW, highly energy-efficient.
    The temperatures of different workstations can be controlled separately, meeting the temperature requirements for different stages of laminated glass production.
  • Durable Glass Harp Rack for Safe Storage and Easy Transportation of Multiple Glass Sheets
    This glass harp rack​ can store various types of glass, such as float glass, tempered glass, LOE-E glass, etc.
    It is an excellent tool for pairing insulating glass. The unique design ensures that the error between the two pieces of glass during pairing is less than 0.5 millimeters.
    Mark numbers at the bottom of the glass harp rack​. The unique pedal design enables quick positioning and retrieval of the glass corresponding to the marked numbers.
    The small nylon wheels at the bottom are used to place the glass. The specially made PVB steel tube is used to isolate the glass, ensuring zero damage to the glass on the glass harp rack​.
    The main body is made of aluminum profiles, with a stable structure and a long service life.
    The surface is coated with epoxy resin powder, giving the glass harp rack​ corrosion resistance.
    It is detachable for easy transportation.
  • Portable Glass Film Deleting Machine​ for Low-E& Insulated Glass with User-Friendly Design
    This low-e glass film deleting machine adopts two film peeling technologies - heating method and mechanical method, and is suitable for different process flows.
    There are two models: single-hand glass film deleting machine and double-hand glass film deleting machine. They are designed in accordance with ergonomics and can save effort.
    Equipped with special grinding wheels, the wear resistance is twice that of ordinary grinding wheels, and its service life is also longer.
    Quickly adjust the pressure, speed and replace the grinding wheel of the film deleting machine, suitable for different types of glass, such as low-emission glass, PVB glass and safety glass.
    High working efficiency, with a maximum rotational speed of up to 1800 revolutions per minute, achieving rapid film removal in a short time.
  • Forklift Crane Arm
    Strong carrying capacity (2 tons - 5 tons) and lifting capacity (6 meters).
    The high-strength steel profile structure gives the forklift jib strong resistance to deformation.
    Compatible with various mainstream forklift models and equipped with quick insertion and release interfaces, no modification of the forklift is required.
    Dual protective devices of protective chains and mechanical locking ensure the risk of chain detachment of the forklift jib boom is reduced, improving safety.
  • Heavy Duty U Shape Container Loading Arm for Glass Panel Handling And Unloading
    Strong carrying capacity: The maximum carrying weight is 2700 tons.
    Intelligent adjustment system: Achieves rapid sliding adjustment through sliders, ensuring that the u shape container loading arm​ can quickly load and unload goods.
    No damage lifting design: Anti-scraping fixation device + rubber edge protection device + buffer device, ensuring that the u shape container loading arm​ will not damage the glass during operation.
    Efficient coordination and cooperation: Can work in coordination with cranes and forklifts.
    Safety protection: Overload protection + automatic locking device activates when the u shape container loading arm​ is in emergency braking.
    Suitable for various sizes of glass: The u shape container loading arm​ supports lifting glass ranging from 800 mm to 4000 mm.
    The main body is made of high-strength alloy steel, with a stable structure and long service life.
    The surface is coated with an epoxy resin layer to prevent rust.
  • Portable Glass Cayman Clamp with Self-Locking Jaw And PU Protection for Safe Loading And Installation
    Semi-automatic glass Cayman pliers Suitable for handling glass of 4 to 19mm in thickness and various sizes
    Small in size, light in weight and easy to operate
    Made of alloy steel, with a stable structure, it can be safely and frequently hoisted
    High-quality rubber suction cups, with strong adhesion and anti-glass scratching properties
    Equipped with anti-slip and anti-drop devices to ensure that the glass does not suddenly slip off the glass lifting cayman clamp, with a high safety factor.
    Fully automatic glass Cayman pliers The fully automatic glass machinery liting clamp is an upgraded version of the semi-automatic glass lifting cayman clamp.
    Structural upgrade: Intelligent ratchet mechanism, no need for manual attachment and release of the glass. As the crane rises and falls, the glass lifting cayman clamp will automatically attach and release the glass, making it more suitable for frequent lifting operations.
    Appearance upgrade: The surface is treated with wear-resistant paint, preventing rust and scratches.
Wentrica
Specializes in providing comprehensive, one-stop solutions for the design, production, and export of equipment in the glass deep processing and door/window industries

QUICK LINKS

CONTACT US
 Tel: +86-185-6282-7317 / +86-156-1595-8376
 E-mail: info@wentrica.com
 Address: Qingda Industrial Area, Chengyang, Qingdao,China
Copyright © 2024 Qingdao Wentrica Composites Co., Ltd All rights reserved Sitemap